Sensors & Modules

Rs. 58  
The 1s 3a 3.7v Li-Ion Bms PCB Protection Board uses the original Fujing imported components. With overcharge, over discharge, over current, short circuit and other protection functions, for a variety of shapes of various shapes 3.7V lithium battery. It adopts rich crystal protection IC, high...
In stock
+

Rs. 318  
Charging module for Li-ion batteries that monitors the charge level and prevents damage to lithium batteries due to incorrect charging cycle. The module allows you to connect up to 3 batteries and charge them with a total current of up to 25A.  Specifications: Maximum operating...
In stock
+

Rs. 294  
Specifications: 3S 40A 12.6V 40A lithium battery protection board (comes with recovery function-AUTO Recovery) Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery) Product weight: 9.8g (balanced version) Charging voltage: 12.6V - 13.6V...
In stock
+

Rs. 372  
Features: 4S 16.8V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery) Integrated 10 low load resistance MOS tube, continuous discharge 40A, 100mA balanced current, for electric drill/sprayer/LED lights/low power inverter Continuous discharge current...
In stock
+

Rs. 833  
0
HW-525 ACS758 Hall Effect Linear Current Sensor Module Parameter: Working voltage: 3 -5V (MAX 8 V) Static output voltage: VCC / 2 Working current: 13.5mA (MAX) Storage temperature range: -65 ° C -165 ° C Maximum output current (VIOUT-GND): 3mA Internal Bandwidth: 120KHz Module Size: 37mm *...

Rs. 294  
0
5A range of single-phase ac current sensor module can measure AC currents less than 5A, the corresponding analog output 5A/5mA. It has Onboard sampling resistor and precision microcurrent transformer do accurate sampling for the signal and appropriate compensation, and other functions. The module...
In stock
+

Rs. 215  
Features: The attribute of the lithium battery protection board: Maximum working current: 8 a working temperature: - 40 - + 50 ° Maximum instantaneous current: 10 a storage conditions: - 40 - + 80 ° Model: HX - 2 s - D01 charging pressure range: 4.25 + / - 0.05 v to 4.35 v Size: 41 *...
In stock
+

Rs. 1,274 Rs. 1,650  
The XH-M452 humidity and temperature controller (ZFX-M452) is designed to maintain the programmed temperature and humidity by turning on / off the heating / cooling and humidifying / dehumidifying devices connected to it. This is possible because the  XH-M452 Electronic Temperature and...
In stock
+

Rs. 850  
Features: This delay relay switches on for some time after power-on, then switches off for some time, and cycles the above process. Output adopts optical coupler isolation to strenhen the anti-interfere ability. Industrial grade circuit board, stable performance. With power-off memory...
In stock
+

Rs. 176  
Description Temperature-Humidity Sensor DHT11 Onboard Weather station, humidity controller, test & detection device Standard single-wire interface The  DHT11 Temperature-Humidity Sensor Module  is a calibrated digital temperature and humidity module with onboard sensor...
In stock
+

Rs. 539  
Description:  This is a timer relay suitable for your incubator and other time-related projects. Timer relay is a Digital display Led Home Automation Delay Timer Control Switch Module Timer Controller, Operating voltage: 6-30V, support micro USB 5.0V power supply, Output capability:...
In stock
+

Rs. 637  
The digital thermometer-hygrometer HTC-2  is a combined device for measuring indoor temperature and humidity. The air temperature and humidity meter is used to control the microclimate parameters in residential, industrial and warehouse premises. With the help of fasteners, it can be hung...
In stock
+

Rs. 147  
The module is designed for simultaneous charging of 2 Li-ion batteries, up to 3A. Charging module for Li-ion batteries based on 8205A microcircuits, charge level controllers. Product parameters: Charging Voltage: 8.4V-9V Overcharge Voltage Range: 4.25V-4.35V ± 0.05V Overpressure...
In stock
+

Rs. 350  
This hygrometer has a probe, which can test some humidity places exactly. It was used widely. Features: Model Number: FY-12 Feature: With probe Temperature Range: -50 ° c ~ 70 ° c Temperature accuracy: 1 ° C Measuring Humidity Range: 10% RH ~ 99% RH Humidity Accuracy: 5...
In stock
+

Rs. 171  
TP5100 2A Lithium Ion 18650 Battery Charger Module TP5100 is a double switch buck 8.4V, single cell 4. 2V lithium battery charge management chip. Its ultra-compact QFN16 package and simple external circuit, making TP5100 ideal for portable equipment so large current charging management...
In stock
+

Rs. 215  
Charging module for Li-ion batteries that monitors the charge level and prevents damage to lithium batteries due to incorrect charging cycle. The module allows you to connect up to 3 batteries and charge them with a total current of up to 10A without heatsink. ...
In stock
+

Rs. 1,372  
This HX-3S-F100A based 100A BMS board also called ( battery management system ). HX-3S-F100A is a protection board for li-ion 18650 cells. There are 10 MOSFET'S, strong heat-dissipating aluminum sheet installed on it, and the continuous current limit is 100A. It is suitable for 3...
In stock
+

Rs. 220  
The L9110 module is often used to manufacture control cars, trackers ... The module uses 2 L9110S drivers, with a compact design but capable of controlling 2 DC motors, suitable for manufacturing small robot models, Low power motor driver. The 2-channel motor control module uses an H-bridge...
In stock
+

Rs. 37  
Features: Current- 1A adjustable. Charge module- Linear charging. Charge precision- 1.5%. Input voltage- 4.5V-5.5V. Full charge voltage- 4.2V. Led indicator- red is charging blue is full charged. Input interface- mini USB. Work temperature- -10 to +85. Inversed polarity- NO....
In stock
+

Rs. 147  
Product features: The maximum output current: 2A The maximum output voltage: > 5V - 28V The input voltage: 2V and 24V Efficiency: > 93% Package Include  1x  MT3608 2A Max DC-DC Step Up Power Module Booster
In stock
+

Rs. 857  
humidity measuring range: 0 --- 100% RH  Humidity measurement accuracy: ± 2% RH  Temperature measurement range: -40 --- 80 ° C  Temperature measurement accuracy: ± 0.5 ° C  Working voltage: DC5V Commonly used  Single bus digital signal output, Serial data...
In stock
+

Rs. 539  
The HTC-1 thermohygrometer is a much more convenient device compared to psychrometric hygrometers, which require a constantly humidified reservoir of one of the thermometers and arithmetic calculations using psychrometric tables. Budget thermo-hygrometer HTC-1 for continuous...
In stock
+

Rs. 350  
The W1209 Temperature Controller is an incredibly low cost yet highly functional thermostat controller. With this module, you can intelligently control power to most electrical devices based on the temperature sensed by the included high accuracy NTC temperature sensor. Although this module...
In stock
+

Rs. 441  
A new efficient digital power amplifier, the PAM8610 is a 15W, class-D audio amplifier. It offers low THD N, allowing it to achieve high-quality sound reproduction. The new filterless architecture allows the device to drive the speaker directly, requiring no low-pass output filters, thus to save...
In stock
+
1 2