Sensors & Modules

Contact us for a price  
★The module is adjustable buck module, you can adjust the module by adjusting the above blue sinking resistor to change the output voltage. Input and output voltage is 1V, the minimum output voltage of 0.8V. ★IN- (input negative), IN + (input positive), OUT- (output negative), OUT + (output...
In stock

Rs. 37  
Features: Current- 1A adjustable. Charge module- Linear charging. Charge precision- 1.5%. Input voltage- 4.5V-5.5V. Full charge voltage- 4.2V. Led indicator- red is charging blue is full charged. Input interface- mini USB. Work temperature- -10 to +85. Inversed polarity- NO....
In stock
+

Rs. 44  
This TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection is a tiny module, perfect for charging single cell 3.7V 1 Ah or higher lithium ion (Li-Ion) cells such as 16550s that don’t have their own protection circuit. Based on the TP4056 charger IC and DW01...
In stock
+

Rs. 49 Rs. 120  
TP4056 Lithium Battery Charging Board 1A TYPE C Overview:The first time you access the battery, it may no voltage between the output OUT + and OUT-, then access 5V voltage charge your energy can activate the protection circuit, and the battery from the B + B-, then draw a line on the short open...
In stock
+

Rs. 58  
TTP223 1 channel capacitive touch module is compact in size and low in price, often used in capacitive touch applications: keyboards, touch switches, alarms, Technical parameters: Main IC: TTP223B Working voltage: 3 - 5VDC Current consumption: 0.025mA Touch through non-metals such as...
In stock
+

Rs. 58  
The 1s 3a 3.7v Li-Ion Bms PCB Protection Board uses the original Fujing imported components. With overcharge, over discharge, over current, short circuit and other protection functions, for a variety of shapes of various shapes 3.7V lithium battery. It adopts rich crystal protection IC, high...
In stock
+

Rs. 117  
Specification The DO output interface can be directly connected to a micro-controller IO port, if there is a block detection sensor, such as the speed of the motor encoder can detect. DO modules can be connected to the relay, limit switch, and other functions, it can also with the active...
In stock
+

Rs. 120  
DC-DC Step Down Converter Module LM2596 DC 4.0~40 to 1.3-37V Adjustable Voltage Regulator DC-DC Step Down Converter Module and Adjustable Voltage Regulator Specifications: Module property:Non-isolation buck Rectification mode:Non-synchronous rectifier Input voltage:3V-40V Output...

Rs. 147  
The DS18B20 Digital Thermometer provides 9 to 12-bit (configurable) temperature readings which indicate the temperature of the device.  Information is sent to/from the DS18B20 over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central...
In stock
+

Rs. 147  
The module is designed for simultaneous charging of 2 Li-ion batteries, up to 3A. Charging module for Li-ion batteries based on 8205A microcircuits, charge level controllers. Product parameters: Charging Voltage: 8.4V-9V Overcharge Voltage Range: 4.25V-4.35V ± 0.05V Overpressure...
In stock
+

Rs. 147  
Product features: The maximum output current: 2A The maximum output voltage: > 5V - 28V The input voltage: 2V and 24V Efficiency: > 93% Package Include  1x  MT3608 2A Max DC-DC Step Up Power Module Booster
In stock
+

Rs. 171  
TP5100 2A Lithium Ion 18650 Battery Charger Module TP5100 is a double switch buck 8.4V, single cell 4. 2V lithium battery charge management chip. Its ultra-compact QFN16 package and simple external circuit, making TP5100 ideal for portable equipment so large current charging management...
In stock
+

Rs. 176 Rs. 220  
The PIR Motion Sensor Detector Module HC-SR501 allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor’s range. It is often referred to using “PIR”, “Pyroelectric”, “Passive Infrared” and “IR Motion” sensor. The module has an onboard...
In stock
+

Rs. 176  
Description Temperature-Humidity Sensor DHT11 Onboard Weather station, humidity controller, test & detection device Standard single-wire interface The  DHT11 Temperature-Humidity Sensor Module  is a calibrated digital temperature and humidity module with onboard sensor...
In stock
+

Rs. 186 Rs. 200  
HC SR04 HC-SR04 Ultrasonic Sensor also called HC-SR04 Ultrasonic Range Finder. Ultrasonic Sensor module HC-SR04 provides 2cm – 400cm non-contact measurement function, the ranging accuracy can reach to 3mm. The modules include...
In stock
+

Rs. 186  
Technical parameters: Model Specification:Automatic Buck module Module Properties:Non- isolated boost (BOOST) Rectification:Non- Synchronous Rectification Output Range:1.25V-35V Input Range:3.8V- 32V Input Current:3A ( max ),no-load 18mA (5V input , 8V output, no-load is less than 18mA....
In stock
+

Rs. 215  
Charging module for Li-ion batteries that monitors the charge level and prevents damage to lithium batteries due to incorrect charging cycle. The module allows you to connect up to 3 batteries and charge them with a total current of up to 10A without heatsink. ...
In stock
+

Rs. 215  
Features: The attribute of the lithium battery protection board: Maximum working current: 8 a working temperature: - 40 - + 50 ° Maximum instantaneous current: 10 a storage conditions: - 40 - + 80 ° Model: HX - 2 s - D01 charging pressure range: 4.25 + / - 0.05 v to 4.35 v Size: 41 *...
In stock
+

Rs. 220  
The L9110 module is often used to manufacture control cars, trackers ... The module uses 2 L9110S drivers, with a compact design but capable of controlling 2 DC motors, suitable for manufacturing small robot models, Low power motor driver. The 2-channel motor control module uses an H-bridge...
In stock
+

Rs. 220  
DS18B20 digital temperature sensor works on a single bus and it has 64-bit ROM to store the serial number of component. It can get quite a few DS18B20 sensors connected to a single bus in parallel. With a microcontroller, you can control so many DS18B20 sensors that are distributed around a wide...

Rs. 245  
The XL7015 DC-DC step-down module is a high efficiency, high voltage step-down DC-DC converter that provides high 0.8A output current capability, low ripple, excellent linearity, and load regulation, and high input voltage. 80V, far more than 2596 and other modules. The chip has multiple...
In stock
+

Rs. 250  
Accurate sensor to measure AC/DC current up to 5A. The sensor can even measure high AC mains current and is still isolated from the measuring part due to integrated hall sensor. The board operates on 5V. ACS712 current sensor operates from 5V and outputs analog voltage proportional to current...

Rs. 250  
Thermocouple K Type Temperature Range 0-800C Sensor Probe Type K (chromel – alumel) is the most common general purpose thermocouple with a sensitivity. Specifications:  Brand new and high quality. Type K Type. Temperature Range:0-600C Internal Insulation:Fibreglass. Thread...
In stock
+

Rs. 274  
Technical parameters: Supply voltage: DC 7V-15V Quiescent current; 20mA SNR: 86% Output power: 10w + 10w (8 load) Efficiency: 90%. Shutdown Current: 4uA Input impedance: 15K Output Impedance: 4-8 Total harmonic distortion: 5W / 1KHz / 8 ---- 0.1>10. Frequency range: 20Hz-20KHz...
In stock
+
1 2