XH-W3001 220V 10A W3001 Digital Temperature Controller

Designed to maintain the temperature of the environment within the specified limits. The XH-W3001 digital temperature controller can be paired with a heater or cooler.

Specifications:

• Temperature control range: -50 ° C ~ 110 ° C
• Temperature measurement accuracy: ± 0.2 C
• Temperature control accuracy: ± 0.1 ° C
• Input measurement: NTC 10K L- 1 meter long probe waterproof
• Supply voltage: 220V
• Output current: up to 10 A
• Overall dimensions: 60 * 45 * 31mm
• Installation height: 73 mm

User's Manual

1. Press and hold the ""up"" button. After 5 seconds the display will flash. We set the temperature for turning on the thermostat.
2. Press and hold the down button. After 5 seconds the display will flash. We set the temperature to turn off the thermostat.
3. If the switch-on temperature is lower than the switch-off temperature then a heater is used with the thermostat.
4. If the switch-on temperature is higher than the switch-off temperature then a cooler is used with the thermostat.
5. The load is connected directly to the yellow-black pair of wires.

ATTENTION!!! The mains voltage appears on these wires when the thermostat is triggered !!!

The set includes a thermostat in a housing and a sealed temperature sensor on a wire ~ 1 meter.
The thermostat can be mounted on a DIN rail.

Package Includes:

• 1 x XH-W3001 AC 220V 10A Digital Temperature Controller