433mhz Rf Transmitter Receiver Module Male Pin Fs1000a

This is FS1000A 433mHz Tx RF Radio Module. This RF module comprises of an RF Transmitter and an RF Receiver. The transmitter/receiver (Tx/Rx) pair operates at a frequency of 433 MHz. An RF transmitter receives serial data and transmits it wirelessly through RF through its antenna connected at pin4.

The transmission occurs at the rate of 1Kbps – 10Kbps. The transmitted data is received by an RF receiver operating at the same frequency as that of the transmitter.

This low-cost RF transmitter can be used to transmit signal up to 100 meters (the antenna design, working environment, and supply voltage will seriously impact the effective distance). It’s good for a short distance, battery power device development. 433 MHz is the operating frequency for transmitter and receiver pair.

Features :

1. Wide input supply (2.5 V to 12V)
2. Easy to integrate (V+, GND, and Data)
3. The device in deep sleep mode when Data pin is grounded
4. Very small dimension.

Receiver Module specification

1. Operation voltage: DC5V
2. Static Current: 4MA
3. Receiver frequency: 433.92MHZ; 315 Mhz
4. Sensitivity：－105DB
5. Dimension：30*14*7mm
6. External Antenna：32CM signal wire，spiral

Transmitter Module Specification

1. Operating voltage: 3-12V
2. Operating frequency: 433.92MHz; 315Mhz
3. Standby current: 0mA
4. Operating current :20-28mA
5. Transmission distance:> 500m (open to receiving plate sensitivity at-103dBm distance of more than)
6. Output Power: 16dBm (40mW)
7. Transfer rate: <10Kbps
8. Modulation mode: OOK (Amplitude Modulation)
9. Operating Temperature: -10 ℃ ~ +70 ℃
10. Size: 19 × 19 × 8mm

Package Includes :

1 x FS1000A 433mHz Transmitter

1 x FS1000A 433mHz Receiver