UTL8200 Series DC electronic load comes with 2.8 inch LCD screen, simple operation and elegant appearance. The product supports dual channel testing up to 40 kHz voltage and current testing rate. With electronic load, the product has a wide range of power measurements and high resolution up to 1mV / 1mA. Abundant test functions and modes are also selectable. The RS232 communication module includes automatic production line and automatic test system (ATS), which can be configured to meet different requirements. The electronic load is constant for wide application scope.
Apps:
power supply test, adapter / charger test, battery test, lithium battery protection board test, ATE, component test, etc., widely used in home appliance manufacturers, LCD and other computer component manufacturers, switching power supply and LED manufacturers and adapter charger Manufacturers and other companies manufacture and test the use.
1. UTL8212 supports dual-channel fully independent testing
2. 4 basic modes: CC / CV / CR / CP
3. High resolution: 1mV/1mA
4. Voltage and current test rate up to 40kHz
5. Multi-mode battery drain test
6. Independent short circuit test
7. Standard RS-232C interface, SCPI protocol supported
Technicial Specifications | ||
model | UTL8212 | |
Number of channels | 2 | |
Input ratings 0~40℃ | Voltage | 0 ~ 150V |
Flow | 0 ~ 2A, 0 ~ 20A | |
Strength | 2×200W | |
CV mode | December | 0~18V, 0~150V |
solution | 1 mV, 10 mV | |
Truth | ± (0.05% + 0.1% FS) | |
CC mode | December | 0 ~ 2A, 0 ~ 20A |
solution | 1mA, 10mA | |
Truth | ± (0.05% + 0.05% FS) | |
CR mode | December | 0.05Ω ~ 7.5KΩ |
solution | 16 bit | |
Truth | 0.1% + 0.5%FS | |
CP mode | December | 200W |
solution | 10mW | |
Truth | 0.1% + 0.5%FS | |
Dynamic Current | ||
dynamic mode | T1 and T2 | 100μS ~ 3600S |
Truth | 5 μS ± 100 ppm | |
Slope | 0.001 ~ 0.15 A / μS | |
Reading voltage | December | 0~18V, 0~150V |
solution | 1mV, 10mV | |
Truth | ± (0.05% + 0.1% FS) | |
Reading current | December | 0 ~ 2A, 0 ~ 20A |
solution | 1mA, 10mA | |
Truth | ± (0.05% + 0.1% FS) | |
reading power | December | 200W |
solution | 10mW | |
Truth | ± (0.1% + 0.5% FS) | |
Basic protection | ||
Over power protection | Setting value × 1.01, delay protection, max. 202W | |
Setting value × 1.1, instantaneous protection, max. 220W | ||
Overcurrent protection | Setting value × 1.01, delay protection, max. 20.2A | |
Setting value × 1.1, instantaneous protection, max. 22A | ||
Over voltage protection | ≥152V delay protection, ≥165V instantaneous protection | |
Over temperature protection | 95℃ | |
solution | 1mV / 1mA | |
simple mode | CC / CV / CR / CP | |
Test mode | Dynamic mode, list mode, battery test | |
Protections | Over voltage / under voltage / over current / over power / over temperature / anti-reverse connection protections | |
System setup | Language: Chinese / English, key tone setting | |
data storage | 60 sets of data memories | |
Interface and protocol | RS232 interface and SCPI protocol | |
PC software | √ | |
general features | ||
Strength | 110V / 220V, 50 / 60Hz | |
view | 2.8 inch LCD | |
Product net weight | 3.6kg | |
Product size (W×H×D) | 300mm x 88mm x 174mm |
No posts found