Search options Open Hide
 or  Reset
Sort Alphabetically: A to Z
24 Per Page
1 Channel 5V Relay Module KY-019
Contact us for a price  
Specifications: The new 5V Relay Module There is a normally open and one normally closed contact A power indicator light A control indicator, pull off, disconnect does not shine Can be used as microcontroller development board module can be used as home appliance control 5 V-12V to TTL...
In stock
6766
1 Channel Relay Module For Arduino
Rs. 132  
The module is triggered, high trigger current less than 5mA, part of the 51 single-chip IO port output capability is weak, pull or increase the drive capability of the circuit. Features: 5V relay can be used as a microcontroller development board module can be used as a home...
In stock
6651
1 Digit 7 Segment 0.7 Inch LED Common Anode Display
Rs. 19  
1 Digit 7 Segment 0.7 Inch LED Common Anode Display is ideally suited to adding a display to your project. 0.7 Inch LED Common Anode Display is compatible with prototyping boards such as the MB-102 which feature standard sockets with a pin pitch of 2.54mm. This module lets you display your...
9156
1 Inch 12V DC Solenoid Valve Coil In Pakistan
Rs. 4,410  
High quality replacement part for use with pipelines in water, air and diesel applicationsActing Motion: Direct action Medium: Air, water, diesel Operating Type: Directly driven State: Normally closed Supply Voltage: 12V DC Pipe Size: 1″ Operating Pressure: 0kg/cm2 – 10kg/cm2 Fluid...
In stock
6764
1 Inch 24v Dc Electric Solenoid Valve Coil For Water Air Gas Fuels
Rs. 5,880  
A Water solenoid valve is an electromechanically operated valve. Air Gas Solenoid Valve has durable brass and quality Brass solenoid construction. High-quality replacement part for use with pipelines in water, air, and diesel applications. Magnetic Solenoid Valve Suit for hot or cold water, gas,...
In stock
12005
1 Meter 18650 Nickel Strip Belt Tape Li-ion Battery Connector Spcc Spot Welding Bms Parts 0.12mm 5mm
Rs. 58  
Features: Has good weldability, high draw tension, easy to operate. Low resistivity Good luster, ductility, weldability With anti-abrasion performance Good properties and electrical conductivity on the tin Specifications: Material: Nickel+steel Current Rating: 5A Size: 0.12x5mm Thickness:...
In stock
11034
1 Piece 18650 Lithium Cell Battery Holder Bracket
Rs. 11  
This Cell Battery Holder Bracket is very useful and very flexible to use. This battery pack is of high quality with stylish design. This cell battery pack can be reserved 720-degree temperature and not break. This best battery pack ABS + PC material, eco-friendly and...
In stock
6197
1 Piece 27mm Piezoelectric Transducers Piezoelectric Sensor , Piezo Transducer
Rs. 9  
A piezoelectric sensor or element is a device that uses the piezoelectric effect, it is basically a device which converts voltage to vibration and vibration to voltage. It normally comes in handy to measure knock (knock sensor) or vibration (vibration sensor). Specifications Of Piezo transducer :...
12189
1 Piece 4040 Corner Fitting Angle Aluminum l Type Connector Bracket For Aluminum Profile
Rs. 98  
Note: The color of the item may vary slightly due to photography and your own computer. Feature: Made of aluminum, it's durable and versatile, a perfect fastener for your furniture. Designed for chests, screens, windows, furniture, etc. Used for reinforcing inside of right angle corner...
In stock
7180
1 Piece 5m x 8mm 5x8mm Flexible Coupling Flexible Shaft Coupling
Rs. 539  
5x8mm Flexible Coupling Shaft can connect your driving shaft with the driven shaft. 5x8mm Flexible Coupling Shaft, it is very efficient in eliminating any misalignment to the possible extent. Minimum backlash is another great advantage of this Aluminium Flexible Coupling. This Flexible coupling...
In stock
6797
1 Piece Common Cathode 5mm Rgb Led Light Emitting Diode Defused
Rs. 14  
It's a standard-sized, 5mm RGB LED, in common-cathode configuration. Tie the long cathode pin to ground, and apply a positive voltage to the individual pins to light up the R/G/B elements in the milky-diffused lens.Specifications: Milky-diffused lense Red element: 630nm 1-2.5 Vfwd 2000mcd @20mA...
In stock
12740
1 piece Mobile Opener Triangle Plastic Pry Opening Tool Kit Security Opener for iPhone Cell Phone Laptop Table PC Case LCD Screen Guitar Picks
Rs. 78  
10675
1 Piece Mp-18650 2400mah 3.7v Lithium Ion Battery
Rs. 343  
This Mp-18650 2400mAh 3.7V Lithium-Ion Battery is a high capacity battery. Lithium-Ion Battery uses for power bank, bright flashlight, headlights,"toys,ecigs, mobile medical equipment, household electrical appliances, and other equipment, for daily use. Lithium battery technology has taken many...
In stock
12198
1 Piece Multiturn Potentiometer 10k Ohm Pot 3590s-2-103l
Rs. 539  
3590S Precision Multiturn Potentiometer is 10 rings adjustable resistor. This 10 turn potentiometer has a wire-wound variable technology that has multi-turn POT 10k Ohm. This 10-turn rotary potentiometer pot has precision workmanship and simple operation. This 10k wire-wound potentiometer is...
In stock
9030
1 Piece Tni-u 40w Sharp Soldering Tip Iron Head Tools For Rework Station
Rs. 176  
These iron tips are electroplated Iron and Nickel which protect them from oxidation, characterized by heat-resistant up to 480 °and lifetime over 20000 welding joints with appropriate use. Features:  High heat resistance and copper resistant durable for use. Lightweight, convenient to use and...
In stock
11599
1 Piece White Color 12V SMD 5050 Waterproof LED Strip Light Module
Rs. 49  
12V 3 SMD 5050 LED strip light is easily connected to the LED power supply to light them up. This LED bulb lights can connect to the LED strip dimmer to adjust the brightness. The back of LED modules with 3M tape, easy install and use 20pcs per string. The 5050 LED lighting modules are a good...
In stock
7571
1 Pieces PTFE Teflon Tube (1 Meters) + 1 Pieces PC4-M6 Quick Fitting + 1 Pieces PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer 1.75mm Filament
Rs. 686  
Specification of PTFE Teflon Tube   Material: PTFE (Poly Tetra Fluoro Ethylene)，Density: 2.15-2.20g/cm3  Heat resistance, up to 260℃   Outside Diameter: 4mm, Inside Diameter: 2mm   Color: White   Length: 1m   Specification of PC4-M6 Fittings   PTFE Tubing OD: 4mm  Thread: M6/3mm  Material:...
In stock
8315
1.0mm Carbide Steel PCB Drill CNC Jewelry Micro Engraving Drill Bit
Rs. 98  
1PC 1.0mm Carbide Steel PCB Drill CNC Jewelry Micro Engraving Drill Bit For DremelSpecifications: Product Name: PCB drill bit (End Mill) Material: blade carbide (tungsten steel) Cutting Edge Diameter: 1.0mm Cutting Edge Length: 9mm Shank Diameter: 3mm Total Length: 38mm Features: Carbide rods...
8316
1.1mm Carbide Steel PCB Drill CNC Jewelry Micro Engraving Drill Bit
Rs. 98  
1PC 1.1mm Carbide Steel PCB Drill CNC Jewelry Micro Engraving Drill Bit For DremelSpecifications: Product Name: PCB drill bit (End Mill) Material: blade carbide (tungsten steel) Cutting Edge Diameter: 1.1mm Cutting Edge Length: 9mm Shank Diameter: 3mm Total Length: 38mm Features: Carbide rods...
9941
1.25 AMP 6x30mm 250VAC glass fuse In Pakistan
Rs. 9  
NEW, UNUSED, fresh out of the box. In electronics and electrical engineering, a fuse is an electrical safety device that operates to provide overcurrent protection of an electrical circuit. Its essential component is a metal wire or strip that melts when too much current flows through it,...
In stock
9410
1.25 AMP 5x20mm 250VAC glass fuse In Pakistan
Rs. 9  
NEW, UNUSED, fresh out of the box. In electronics and electrical engineering, a fuse is an electrical safety device that operates to provide overcurrent protection of an electrical circuit. Its essential component is a metal wire or strip that melts when too much current flows through it, thereby...
In stock
8317
1.2mm Carbide Steel PCB Drill CNC Jewelry Micro Engraving Drill Bit
Rs. 127  
1PC 1.2mm Carbide Steel PCB Drill CNC Jewelry Micro Engraving Drill Bit For DremelSpecifications: Product Name: PCB drill bit (End Mill) Material: blade carbide (tungsten steel) Cutting Edge Diameter: 1.2mm Cutting Edge Length: 9mm Shank Diameter: 3mm Total Length: 38mm Features: Carbide rods...
11783
1.35mm Carbide Steel PCB CNC Jewelry Micro Engraving Drill Bit
Rs. 196  
For high accuracy and efficient drilling of steels, carbon steels, and difficult-to-cut materials. Carbide drills can only be used in a low vibration, high-speed rotary equipment, or carefully by hand using a pin vise. DO not attempt to drill using a hand drill or regular drill press, they do not...
11786
1.45mm Carbide Steel PCB CNC Jewelry Micro Engraving Drill Bit
Rs. 147  
The SS coating on these drill bits is harder than a TiCN coating and withstands high temperatures. It protects the bits from abrasion and wears when drilling steel, stainless steel, and heat-resistant alloys. Carbide micro drill bits provide excellent hardness, wear resistance, and heat...
1 2 3 4 5 6 7 8
3 - 17
     or   Cancel