Arduino 0.96 Inch Iic Oled Display 128x64 I2c Ssd1306 Lcd Screen

The OLED graphic display has a black surface and blue and yellow graphics good image quality wide viewing angles. The lack of backlight makes it thinner and lighter.

OLED display with a screen size of 0.96 ″ and a resolution of 128 * 64 dots for connection to Arduino boards. Has three connection options:  4-wire SPI / 3-wire SPI / I2C. The wiring of jumpers and resistances for selecting connection options is given on the display board itself. 

OLED (Organic Light-Emitting Diode) displays use a technology in which LEDs themselves emit light without additional illumination such as in LCD displays. An OLED display consists of a thin multilayer organic film sandwiched between the anode and cathode. OLED has high application potential for almost all types of displays and is seen as the ultimate technology for the next generation of flat panel displays. The quality of information display cheapness and ideal viewing angles of the OLED display make it the leader among displays.

Features of OLED L2C display:

• No display backlight required.
• High resolution: 128 * 64 pixels.
• Viewing angle: more than 160 degrees.
• Fully compatible with Arduino 51 series controllers MSP430 series STM32 / 2 CSR IC etc.
• Ultra-low power consumption: at full screen glow 0.08W.
• Working voltage: DC 3V ~ 5V.
• Working temperature: -30 ° C ~ + 70 ° C.
• Driver IC: SSD1306.
• Board size: 27.8mm x 27.3mm x 4.3mm.
• Display size: 27mm x 19.5mm (0.96 ″ inches).
• Interface 4-wire SPI / 3-wire SPI / I2C Selectable

Package Includes:

• 1 x Arduino 0.96 inch IIC OLED Display